• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

MetAMMI

A LNE Joint Research Project

  • Home
  • The project
  • Workpackages
  • Partners
  • Tools / publications
  • Member Space
logo-metammi
Home / Tools / publications

Tools / publications

Deliverable

  • Deliverable 1 : THz-CT technique in comparison to XCT
  • Deliverable 2 : Good Practice Guide for the correct choice of characterisation technique depending of the level of accuracy needed and the type of measurement required
  • Deliverable 3 : Good practice guide for medical XCT image acquisition and analysis
  • Deliverable 4 : Validated Protocols for medical device characterisation along the AM process chain
  • Deliverable 5 : Characterisation/clinical phantoms
  • Deliverable 6 : Detection and Prevention of Geometrical Deviations
  • Deliverable 7 : Full Manufacturing Chain Monitoring
  • Deliverable 8 : Report on case studies
  • Deliverable 9 : Standardisation

Download documents

Publishable Summary

Publications and conferences

A-F. Obaton, J. Fain, M. Djemaï, D. Meinel, F. Léonard, E. Mahé, B. Lécuelle, J-J. Fouchet, G. Bruno, “In vivo XCT bone characterisation in lattice structured implants fabricated by additive manufacturing: a case report”, Helyon DOI : 10.1016/j.heliyon.2017.e00374

Leppälä, “Verifying 3D-printed preoperative models with optical and coordinate measuring machine”, AaltoDoc http://urn.fi/URN:NBN:fi:aalto-201707045964

Zongo, A.-F. Obaton, E. Baustert, « Recherche de méthodes de routine pour caractériser les pièces personnalisées réalisées en masse par fabrication additive », Assises Européennes de la fabrication additive de l’AFPR, ,France, June 2016.

A.-F. Obaton, « La fabrication additive et les nouveaux défis pour la mesure de pièces », Micronora, France, September 2016

A.-F. Obaton, « Contrôle : nouvel enjeu pour la fabrication additive », 3D Print, France, October 2016

A.-F. Obaton, “Fabrication additive et tomographie “, French workshop for form/shape metrology, AIP Primeca, France, December 2016

J.B. Perraud, A.F. Obaton, J. Bou-Sleiman, B. Recur, H. Balacey, F. Darracq, J.P. Guillet and P. Mounaix, ”Tomography and image processing for polymer additive manufacturing characterization”, 41st International Conference on Infrared, Millimeter, and Terahertz waves (IRMMW-THz), Denmark, September 2016

J.B. Perraud, A.F. Obaton, J. Bou-Sleiman, B. Recur, H. Balacey, F. Darracq, J.P. Guillet and P. Mounaix, “Tomography and image processing for polymer additive manufacturing characterization”,8th International Symposium on Ultrafast Phenomena and Terahertz Waves, China, October 2016

AF- Obaton,  “Non-destructive volumetric control of additive manufactured parts: alternatives methods to X-ray tomography”,Quality Control for Additive Manufacturing, Euspen, United Kingdom, January 2017

AF- Obaton, “Overview of the European project MetAMMI: Metrology for additively manufactured medical implants”, Young Ceramists Additive Manufacturing Forum (Y-CAM), Germany, March 2017

J.B. Perraud, A.F. Obaton, J. Bou-Sleiman, B. Recur, H. Balacey, F. Darracq, J.P. Guillet and P. Mounaix, “THz Tomography and image processing : a nexw tool for polymer and ceramic additive manufacturing characterization”, Pharos Event 2016, France, October 2016

A-F. Obaton,  M-Q. Lê, V. Prezza, D. Marlot, P. Delvart, A. Huskic, S. Senck, E. Mahé, C. Cayron, “Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts”, ICWAM 2017, France, May 2017

A-F. Obaton, C. Cayron, « Contrôle pièces »,  AFPR 2017, France,  July 2017

Salmi, “3D models and the digital workflow of 3D printing in medicine”, International Conference on 3D Printing in Medicine, Germany, May 2017

Salmi, “Workflow for 3D printing of medical models – phases, timeline and costs”, Seminar on Biomaterials and Additive Manufacturing – Doctoral Programme for Clinical Research (KLTO) , Finlad, October 2017

Schwentenwein, “Lithography-based Additive Manufacturing for Producing Dense and Precise Ceramic Components”, yCAM, Germany, March 2017

 

 

 

Primary Sidebar

EMPIR project

Agenda

Workshop on Additive Manufacturing

Download

Workshop announcement

Publishable summary

2017-04-24-15HLT09 impact and output template M18

15HLT09 IO Report template for M27

Footer

  • LNE presentation
  • Legal Information
  • © 2016 – Webmaster
  • Advent
  • EDC-WFD
  • ELENA
  • Emirim
  • Hydrogen
  • MeTRA
  • TEMMT
  • Linkedin
  • YouTube
  • LNE Website
  • Contact Us
  • Specialized websites:
    • Food contact
    • GMED
    • French metrology
  • Around the world:
    • LNE-LP Asia Ltd